About the ASHIRASE2 Devices

1. Box Contents

  • ASHIRASE2 device (1 set)
  • Charging cable (1)
  • Product warranty card (1)
  • User guide (1)

2. Names of Parts

Vibration belt: The soft belt portion of the ASHIRASE2 device

Main unit: The hard plastic portion of the ASHIRASE2 device

3. How to Operate the Device

Here’s how to check the battery level and remove the device.

3-1. How to Operate the ASHIRASE2 Device

You can operate the ASHIRASE2 device using the power button. Here’s how to use it:

  • Power On: Press and hold the power button for about 5 seconds.
  • Pairing Mode: Press and hold the power button for 5 to 8 seconds to enable app connection.
  • Power Off: Press and hold the power button for about 10 seconds.
  • Battery Check: Press the power button once.
    • Three beeps: 80% or more
    • Two beeps: 30% to 80%
    • One beep: Below 30%

The device will automatically enter Eco Mode (Sleep Mode) after 10 minutes of inactivity, so manual shutdown is not necessary. When you open the app, it will automatically connect to the device.

3-2. How to Charge the Device

ASHIRASE2 uses a USB Type-C cable for charging, which is included in the package. To charge the device, remove it from your shoes. Check that the connector at the bottom is clean and dry before inserting the charging cable. Charging takes about 1-2 hours, and the device can be used for approximately 10 hours on a full charge.

3-3. Checking the ASHIRASE2 Device Battery Level

You can check the battery level through the ASHIRASE app or directly on the device.

  • In the app: The battery level for each foot is displayed at the top of the menu screen.
  • On the device: Pressing the power button will produce beeping sounds to indicate the battery status.

3-4. Removing the Device

To remove the device, pinch the vibrating part of the belt on the heel or side and pull it upwards from the shoe.

We hope ASHIRASE will support you in exploring new places confidently!